Application guides

Choosing between CIJ and thermal transfer for flexible film

Both will put a code on a pouch. Only one will still be legible after the seal jaw, the carton and the truck.

24 Jul 20261 min readSite Administrator, Systems

PLACEHOLDER ARTICLE — replace this copy from Admin → Blog. The structure below shows how a technical article renders.

What the substrate decides

Describe how film surface energy, coating and print speed narrow the choice between continuous inkjet and near-edge thermal transfer.

Cover non-contact marking, curved surfaces, high line speeds and lower consumable cost per code.

Cover 300 dpi resolution, small barcodes, regulatory text and logos printed directly onto film.

Explain the sample test you run for customers, what you need from them, and what the report tells them.

Application guides

Wax, wax-resin or full resin — the decision comes down to what the pack has to survive.

06 Jul 20261 min readSite Administrator

Application guides

Encoder-driven length counting, drum resets, and keeping a legible code at 10 m/s.

30 Jun 20261 min readSite Administrator

Maintenance

Ambient temperature moves, viscosity follows, and the code gets thin by the afternoon. Here is what to check.

18 Jul 20261 min readSite Administrator

Send us the material and the line speed. Our application engineers will tell you what actually works.